More work completed on the fuel line

                      

                       

                    

So after much deliberation on how best to run this section I have finally fitted the fuel line from the fuel filter to the t-piece and then on to the fuel regulator. I initially fitted the fuel regulator (unfortunately only available in blue but it will be hidden out of site anyway) to the chassis brace (AK Gen3 only) by drilling and tapping holes but I wasn't happy with this so I ended up using rivet nuts and 5mm allen key bolts to hold the regulator in place.

We needed to purchase a specific hose end finisher to fit on the threaded -6AN male to 3/8" female fitment from the engine and after speaking with BRT Motorsport, we managed to work out exactly what we needed (Straight Push On Push Lock Hose Fitting -6). We are now just waiting for these to be delivered to finish off this end. I am reasonably pleased with how the fuel line has turned out and I am sure there should be no chance of any leaks 🤞!!