Brake & Clutch lines

When you purchase a rolling chassis from AK you have a lot of the brake and clutch lines already done. I had already fitted the clutch flexi hose so all that was left to do was to run the clutch pipe up from the chassis rail to the clutch master cylinder, and the brake pipes up to the brake servo. I used a flaring tool to flare each end of the pipe, only once forgetting to place the pipe connector on first! I used 3/16" for the brake lines, 1/4" for the clutch line and male to male connectors to attach each pipe run. Also used a male to female adapter in the top of the clutch master cylinder. I fitted the brake line switch and mounted this on the back of the wheel arch. I may need to add a few clips to hold the pipe work in place and to keep the IVA man happy... Hopefully I have no leaks!